Clear-Com
Clear-Com
Clear-Com BS410
2-channels of communications 2.4GHz license-free operation Supports up to 15 beltpacks in a single system 7kHz wideband audio 2-wire and 4-wire bridging on the same system 2-wire auto-nulling Lost packet concealment Simple to set up and configure
- Product code
- BS410
- Category
- comms
Specifications
Audio
- Channels
- 2 audio channels
- Capacity
- Up to 15 BP410 and/or WH410 per base station
- Full-Duplex
- Yes. Single-channel = 4 in simultaneous full-duplex. Dual-channel = 3 in simultaneous full-duplex. Radio Frequency Range: 2400 – 2483.5 MHz
- Audio Frequency
- 200 Hz – 7kHz
- 4-wire I/O
- RJ45, 600 Ohms balanced, level adjustable, simultaneous operation with 2-wire
- 2-wire I/O
- XLR-3M, XLR-3F, externally-switchable RTS or Clear-Com, 200Ω , level adjustable, null adjustable to 50dB attenuation, typical
- Aux Input
- XLR-3F with ¼” (6.35mm) combo jack, 600Ω balanced, level adjustable
- Aux Output
- XLR-3M, 600Ω balanced, level adjustable
- Headset Connector
- 4-pin mini-DIN, Electret microphone
- Headset Output
- 200mW into 32Ω
- Antenna Type
- External ½-wave dipole (R-TNC connector), RX/TX horizontal/vertical diversity
- System Distortion
- <2%
- Communication Security
- dual-slot diversity
Transmitter
- Type
- Frequency Hopping, Spread Spectrum (FHSS)
- Transmit Power
- 100mW burst
- Modulation Type
- Gaussian filtered FSK, TDMA
- Frequency Stability
- 13 ppm
- Harmonics/Spurious
- Exceeds FCC and ETSI specifications over temperature
Receiver
- Type
- Frequency Hopping, Spread Spectrum (FHSS)
- RF Sensitivity
- <-90dBm w 10-3 BER
- Frequency Stability
- 13 ppm
- Distortion
- <2%
Power Requirements
Environmental
- Temperature
- +32° - +122°F (0° - +50°C)
