Christie Digital

Christie Digital
Christie D13WU2-HS laser projector - End of production
The Christie® D13WU2-HS reached end of production status on October 02, 2025.
- Product code
- CHRISTIE-D13WU2-HS
- Category
- Video
- Family
- end-of-production
- Weight
- 41.6 kg
- Power
- 50 W
Specifications
- Brightness
- 13500 ISO lumens* 12500 ANSI lumens*
- Color wheel
- 4 Segment (RGBY) - 2X or 3X speed
- Contrast ratio
- Full On/Off (Christie Real Black enabled): 2,000,000:1 , Full On/Off (Christie Real Black disabled): 1,200:1
- Dynamic contrast
- 6000:1
- Display type
- 1 x 0.96" DMD
- Resolution
- WUXGA (1920 x 1200)
- Image brightness1
- 13,500 ISO lumens • 12,500 ANSI lumens
- contrast (nominal)
- Full On/Off (Christie RealBlack™ enabled): 2,000,000:1 • Dynamic contrast: 6,000:1 • Full On/Off (RealBlack disabled): 1,200:1 • ANSI 250:1
- technology native resolution
- 1920 x 1200 (2,304,000 pixels) (16:10)
- Illumination type
- Laser phosphor with Christie BoldColor™ technology
- performance
- 20,000 hours to 50% brightness
- Signal Inputs standard
- HDMI x 2 (HDCP 2.2) (one on side panel, one on bottom) • 3GSDI x 1 (BNC) • DVI-D x 1 (digital only) • VGA x 1 • USB x 1 (Type A) • Wi-Fi dongle (optional) • HDBaseT (RJ45) x 1
- signals
- HDTV formats VGA through to WUXGA (1920 x 1200) • Horizontal and vertical scaling while maintaining aspect ratio (all inputs)
- 3D
- HDMI 1.4, HDBaseT – frame packed, top/bottom, side-by-side (up to 120 Hz output); frame sequential at 1080P up to 120 Hz. • 3D sync in (BNC) for genlocking projectors • 3D sync out (BNC) for genlocking projectors, or controlling emitter or polarizer
- pixel clock
- 162 MHz
- scan rates
- Horizontal: 15–91 kHz • Vertical: 24–85 Hz
- Signal outputs monitor out (loop-
- 3GSDI x 1 (BNC) • HDMI x 1 (HDMI out)
through)
- Control and networking
- HDBaseT (RJ45 x 1) • RJ45 x 1 (Ethernet control over wired network connection) • RS232 x 1 • Built-in backlit keypad • IR Remote • Remote in: 3.5 mm stereo female (provides serial communications and power) • Loop out available for daisy chaining • DC jack 12 VDC, 200 mA.
- Warping and blending standard
- Christie Twist™
- optional
- Twist Premium and Twist Pro • Mystique™ automated camera-based alignment
- Lenses mount type
- Boresight adjustable • Motorized horizontal and vertical lens offset (memory available) Motorized zoom and focus adjustment (memory available for full ILS lenses)
- lens options
- 0.38:1 ultra short throw lens • 0.84-1.02:1 zoom lens (no zoom/focus memory) • 1.02-1.36:1 zoom lens (no zoom/focus memory) 1.2-1.5:1 zoom lens (full ILS) • 1.5-2.0:1 zoom lens (full ILS) • 2.0-4.0:1 zoom lens (full ILS) • 4.0-7.0:1 zoom lens (full ILS)
- offsets for 0.38:1 UST lens
- +100/-55% Vertical • +4/-28% Horizontal
- offsets for 0.84-1.02:1
- +108/-74% Vertical • +40/-49% Horizontal
- offsets for 1.02:1-1.36:1
- +124/-98% Vertical • +40/-49% Horizontal
- offsets for full ILS Lenses
- ±140% Vertical • ±50% Horizontal
- Accessories standard
- IR remote with wired remote jack (wire not included) • AC line cord for projector • Product Safety Guide
- Power requirements operating voltage
- Normal: 120–240 VAC at 60/50 Hz with 15 A fuse
- power consumption
- Normal: 1,050W • ECO1: 900W ECO2: 600W
- operating current
- Normal: 13 A (100 V for Japan), 10 A (110 V for Taiwan), 12 A (100–240 V), 7 A (200–240 V)
- dissipation
- Normal: 3,583 BTU/hr • ECO1: 3,071 BTU/hr • ECO2: 2,047 BTU/hr
- Audible noise
- Standard: 38dB(A) • ECO2: 35dB(A) (2x wheel speed) • Standard: 39dB(A) • ECO2: 37dB(A) (3x wheel speed)
- Physical size
- (LxWxH) 26.7 x 23.5 x 8.0" (677 x 596 x 203 mm) without feet
- shipping size
- (LxWxH) 38.0 x 31.3 x 14.4" (965 x 795 x 365 mm)
- weight
- 91.52 lbs (41.6 kg)
- shipping weight
- 117.7 lbs (53.3 kg)
- Operating environment temperature
- 32–104 F (0–40 C)
- humidity
- 10–85% non-condensing
- Regulatory
- This product conforms to all relevant European directives, standards, safety, health, and environmental concerns • Directives: RoHS • REACH • WEEE • Contact Christie for timing of certifications: UL/CSA/IEC 60950-1 • CCC, CEL, CECP • FCC Class A • cTUVus • CE • FDA • CCC • KC • PSE • EAC • BIS • VCCI • RCM • TER • Mexico • BSMI
- Warranty
- Three years parts and labor on the projector • Three years or 20,000 hours parts and labor on the illumination system2 • Contact an authorized Christie representative for full details of our limited warranty
Documents
- ManualChristie One Aluminum Rigging Frame Instruction Sheet
- ManualChristie One Frame Assembly Instruction Sheet
- ManualHS Series 2K Installation and Setup Guide
- ManualInstalling the HS Series and Jazz Series ultra- short throw lens instruction sheet
- ManualShining light on laser phosphor illumination
- Datasheetd13 2 hs datasheet
- DatasheetHS Series Datasheet - English
- APIChristie HS Series 2K Serial API Commands Technical Reference
- FirmwareChristie D13/D16/D20 HS-Series release notes v1.9.0
- FirmwareChristie HS Series Software Release Notes V1.3.0
- FirmwareD13/D16/D20 HS-Series release notes v1.10.0
- FirmwareD13HD/D13WU H-Series SRN v1.4.0
- Documentanatomy of a laser phosphor projector
- Documentboldcolor infographic
- Documentboldcolor infographic
- DocumentChristie Auto Warp guide for H Series, HS Series and GS Series
- DocumentChristie HS Series 2K Product Safety Guide-Multilingual
- DocumentChristie Laser Projection System (Enterprise) Installation Checklist
- DocumentFine Tuning Color with HSG Adjustment
- DocumentH Series, HS Series and GS Series Warping and Blending guide
- DocumentHS Series 2K WU lens throw ratios technical reference information
- DocumentHS Series Projector Lens Compatibility Technical Bulletin
- DocumentInstalling the Ultra Short Throw Lens
Documents are hosted by the manufacturer; these are links to their files.