Brainstorm Electronics
Brainstorm Electronics
Brainstorm SR-112
DXD-16 Timecode Distripalyzer is a Timecode Reader, Distributor, Reshaper, Analyzer and optional Generator with 12 buffered outputs
- Product code
- SR-112
- Category
- Other
Specifications
- TC Distributor
- 1×12
- TC Input Connector
- XLR Female
- TC Output Connectors
- 1 x DB-25 F (8 outputs – Tascam/Avid analog pin configuration), 2 x XLR M, 2 x 1/4” TRS
- Input Signal
- SMPTE/EBU Longitudinal Time Code; Impedance: 20KΩ bal.; 10KΩ unbal.; Level: -30dbU min; +20dbU Max
- Output Signal
- Waveform: switchable rise time: 1us (square); 25us (SMPTE); 50us (EBU); Impedance: 600Ω bal.; 300Ω unbal.; Level: adjustable: full off to +8dbU bal.; to + 2dbU unbal.; Amplitude distortion: less than 2%
- Status LEDs
- Reshape • Generate (TCG option) • Video In • Repair (TCG option) • TC In • Ethernet
- Warning LEDs
- Input Error (red) • Video Drift (red) • Video Phase (yellow) • Video Termination Off (yellow)
- Time Code Reader
- The 8 digit LED Display indicates hours, minutes, seconds and frames.; The display also flashes error descriptions when detected.
- LCD Display
- In addition to being used for SET UP, the 32 carachter LCD display indicates the following:; Format and rate of the incoming time code; Format and rate of the video reference; User Bits; Video Phase; List of errors
- Connectors
- Time Code in: XLR Female (x 1); Video Ref: BNC (x 1); Time Code outputs:; DB25 (1x) – Tascam/Avid analog pin configuration: outputs 1-8; XLR Male (2x): outputs 9-10; 1/4” jacks (2x) – TRS: outputs 11-12; Ethernet: RJ45 jack (x 1); Power: 4 pin circular (x 2)
- Power
- 12VDC @ 3A; Redundancy: two separate supplies can be connected to the 2 separate power inputs. If one supply fails, the other takes over and an error is reported. The faulty supply can be swapped without having to power down.
- Dimensions
- 19” x 8.125” x 1.75” (48.26 cm x 20.64 cm x 4.45cm)
