Blackmagic Design

ATEM Monitoring Rack Panel 20

Specifications

10G 2110 IP Networks: 2 x 10G RJ45 connections.
1G Control Network: 1 x 1G RJ45 for connection to switcher and NMOS control.
Total Video Inputs: 1
Total Video Outputs: 3
SDI Video Outputs: 2
SDI Rates: 1.5G, 3G, 6G, 12G.
HDMI 2.0 Video Inputs: 1
SMPTE ST 2110 IP Audio Inputs: 16 Ch embedded audio on each 2110 IP video stream over 10G Ethernet.
SDI Audio Outputs: 16 Ch embedded audio on all SDI outputs.
HDMI Audio Outputs: 8 Ch embedded audio on HDMI output.
Talkback: 1 x 5-pin XLR Talkback.
Computer Interface: 1 x USB-C for setup utility and software updates.
Power: 2 x IEC C14 power inputs.

HD Video Standards: 720p50, 720p59.94, 720p60 1080i50, 1080i59.94, 1080i60 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
Ultra HD Video Standards: 2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30, 2160p50, 2160p59.94, 2160p60.
SMPTE Compliance: SMPTE 2110-20, SMPTE 2110-21, SMPTE 2110-30, SMPTE 2110-40, SMPTE 2022-7
Video Sampling: 4:2:2
Color Precision: 10-bit.
SDI Color Space: Rec. 709, Rec. 2020

SMPTE 2110-20 (Uncompressed Video): IGMP v3
SMPTE 2110-21 (Traffic Shaping): Sender: Narrow
SMPTE 2110-30 (PCM): Audio Conformance level: Level C
SMPTE 2110-40 (Ancillary Data): Full access to entire SMPTE ancillary data stream. Includes RP 188/SMPTE 12M-2, closed captioning and HDR static metadata.
Codec: Blackmagic IP10 codec optional for 2160p59.94 and 2160p60 as 2110 IP video.
Precision Time Protocol: IEEE 1588-2008 (PTP v2)
NMOS IS-04 Discovery and Registration: v1.3.2
NMOS IS-05 Connection Management: v1.1.2
NMOS BCP-002-01: Natural Grouping
NMOS BCP-004-01: Receiver capabilities

Talkback Support: Yes
Control: Front panel emergency switching, software or optional hardware panel.

Front panel: Built in HD LCD monitor for video, 22 LED buttons for setup and emergency switching, 8 source buttons, 4 transition buttons, 6 talkback selection and mix buttons, menu control knob and set button, front panel lock button.

Control Panel Included: ATEM Software Control Panel included free for macOS 14.0 Sonoma, macOS 15.0 Sequoia or later and Windows 10 and 11.
Software Updates: Using USB or Ethernet connection directly connected to Mac or Windows computers. Includes ATEM Setup Utility.
Configuration: Set via ATEM Software Control Panel, excluding ATEM chassis IP address which is set via the ATEM Setup Utility connected via USB-C to chassis.