Artistic License
Artistic Licence moody CV

Artistic License

Artistic Licence moody CV

Direct control of white or RGB LED tape Wall mounted lighting controller with built-in CV (constant voltage) dimmer, providing direct control of white or colour LED tape. Variants: moody cvi1 – Controls a single channel of intensity (white or single colour) moody cvx1 – Controls a single zone of RGB colour moody cvz1 – Same as cvx1, but grand master varies colour not intensity moody cvf1 – Controls dynamic fades in a single zone of RGB colour The overall look of the product is determined by the choice of cosmetic cover plate, which can be optionally purchased with the product. The material finish options are: matt black, matt black with chrome dial, brushed steel, stainless steel, chrome and polished white. Please add the cover plate to your cart as a separate item. The product is housed in a single gang UK wall panel and is supplied complete with a dry-line style back box which allows the product to be used internationally. The material finish options are chrome, brushed steel, stainless steel, matt black with chrome dial, matt black, and polished white. Please note that the matt black and polished white cover plates do NOT support the illuminated dial feature. The product can be powered from 9 to 24 VDC. This means that the LED fixture power supply can also power the moody cv dimmer.

Product code
MOODY CV
Category
Lighting

Specifications

Operation

Programming and operation are performed via a very simple user interface, so no additional programming kit is required. All electronics are mounted on the rear of the product, so there is no need for cumbersome external control boxes.
The user interface is a rotary control dial which incorporates a push switch. The dial is illuminated by a full colour LED which is used to feedback both master level and colour to the user. (Please note that if either the black or polished white cover plate options are chosen, the illuminated dial feature is not supported).
From a user perspective, the product echoes the operation of a conventional dimmer switch: rotate to control intensity (or colour for the z variant), push to auto-fade on or off.
Product programming is achieved by holding down the push switch for 3 seconds. The user is then able to step-through the desired settings for each channel or zone, depending on the variant selected (see moody User Guide for full instructions). A rear panel control allows programming to be inhibited; this is useful for preserving the original design intent in an application with many users (e.g. a hotel room).
The material finish options are: chrome, brushed steel, stainless steel, matt black with chrome dial, matt black, polished white. Please note that the matt black and polished white cover plates do NOT support the illuminated dial feature.

Features

Wall panel mount
Choice of contemporary material finishes
Wall mount lighting controller
CV dimming 12-24 VDC
Intensity, colour, and dynamic effects control
Grandmaster control
Full RGB illuminated control wheel (excluding black and powder white fascia plates)
No external programming is required.
Dry-line back box supplied.

Specification

Listing
CE
IP Rating
Indoor use
Power
500mW plus LED load
Input Voltage
12-24 VDC
LED Drive Current
5A total
Output modulation
PWM 63kHz
Height
86mm
Width
86mm
Depth
15.2mm behind mounting surface
Net Mass
0.11 kg
Mounting screw centres
60.6mm
LED output
Screw Terminal
Power Connection
Screw Terminal
Manufacturer
Artistic Licence
Country of Manufacture
UK

Variants

cvi1
cvx1
cvz1
cvf1

Specification from Artistic License