S30-RP

Technical Data

Category

LED

Series

SkyPanel

Model

S30-RP

Lamphead Type

LED Soft Light

Optical System

Remote Phosphor Panel

Weight in kg / lbs net*

Manual Version: approx. 7.7 kg / 17.0 lbs Pole Operated Version: approx. 9.5 kg / 20.9 lbs Fixture only, incl. Diffusion: approx. 6.3 kg / 13.9 lbs

Weight in kg / lbs net packed*

Manual Version: approx. 14 kg / 31 lbs Pole Operated Version: approx. 16 kg / 34 lbs

Measurements (HxWxL) incl. Pin in mm / inch*

Manual Version: 499 x 507 x 133 mm /19.6 x 19.9 x 5.2" Pole Operated Version: 567 x 504 x 133 mm / 22.3 x 19.8 x 5.2"

Measurements (HxWxL) excl. Pin in mm / inch*

Manual Version: 426 x 507 x 133 mm / 16.8 x 19.9 x 5.2" Pole Operated Version: 452 x 504 x 133 mm / 17.8 x 19.8 x 5.2"

Measurements (HxWxL) Packed size in mm / inch*

470 x 665 x 300 mm / 18.5 x 26.2 x 11.8"

Housing Color

Blue/Silver, Black

Power Consumption

200 W Maximum

Lamphead Voltage Input

48 V DC

Light Aperture / Lens Diameter in mm

355 x 300 mm

Light Aperture / Lens Diameter in inch

14.0 x 11.8"

Beam Angle

105° (Half Peak Angle)

Handling

Aluminium Yoke, High-Strength Tilt Lock / Steel Yoke, Pole Operation for Pan & Tilt

Mounting

16 mm / 28 mm Combo Pin (Baby 5/8" / Junior 1-1/8" Combo.Pin) / 28 mm Spigot (Junior Pin)

Tilt Angle

+/- 90°

Lamphead Power Connection

Male 3-Pin XLR - 15 Amp (Pin 1: Negative / Pin 2: Positive)

Battery Connector

Male 4-Pin XLR - 10 Amp (Pin 1: Negative / Pin 4: Positive)

Battery DC Voltage Range

23 to 36 V DC

Battery Mode Light Output

100 % of total output

Lamp Type

Blue LED Light Engine (for Remote Phosphor Panels)

White Light

Changeable Remote Phosphor Panels: 2,700 K; 3,200 K; 4,300 K; 5,600 K; 6,500 K; 10,000 K & Chroma Green

Colored Light

-

Color Temperature Tolerance

4 to 5 SDCM

Color Rendition

2,700K: CRI > 98, TLCI > 98, 3,200K: CRI > 98, TLCI > 98, 4,300K: CRI > 97, TLCI > 96, 5,600K: CRI > 97, TLCI > 96, 6,500K: CRI > 96, TLCI > 94, 10,000K: CRI > 92, TLCI > 88

Green-Magenta Adjustment

-

Dimming

0 to 100 % continuous

Control

On-Board Controller, 5-Pin DMX In and Through, EtherCon LAN network connectivity, USB-A, Art-Net

Wireless Control

Not integrated, via SkyLink

Remote Device Management (RDM)

DMX Setup, Hour Counter and Standard RDM Commands

Software / Mini-USB Interface

Ethernet: DMX Setup, Fixture Status and Firmware Upgrade through PC, Mac USB-A: Software Upgrade via flash drive

Ambient Temperature Operation

-20 to +45° C (-4 to +113° F)

Protection Class / IP Rating

III / IP 20

Estimated LED Lifetime (L70)

50,000 hours

Estimated Color Shift Over Lifetime (CCT)

+/- 5 %

Certifications

CE, UKCA, CB, ENEC, cNRTLus, FCC, PSE

Power Supply Unit

S30 PSU

Power Supply Input Range

110 to 240 V ~, 50/60 Hz

Power Supply Output Range

48 V DC

Power Supply Power Input Connection

powerCON TRUE1 (Bare Ends / Schuko / Edison)

Power Supply Power Output Connection

Female 3-Pin XLR to 10 Amp (Pin 1: Negative / Pin 2: Positive) powerCON TRUE1 (mains power through)

Weight in kg

approx. 2 kg

Weight in lbs

approx. 4.6 lbs

Measurements (HxWxL) in mm*

91 x 115 x 388 mm

Measurements (HxWxL) in inch*

3.6 x 4.5 x 15.3"

Power Supply Mounting

SkyPanel PSU Super Clamp Adapter / Rail Mount Adapter

Power Supply Certifications

CE, UKCA, CB, ENEC, cNRTLus, PSE