AJA
AJA
Corvid 44 12G Compact 12G-SDI Power
AJA’s blazingly fast, compact 8-lane PCIe 3.0 I/O card with four bidirectional 12G-SDI HD-BNC connections, designed for today’s most demanding video and audio workflows.
- Product code
- CORVID-44-12G
- Category
- Video
Specifications
- Video Formats
- (8K) 8192 x 4320p 23.98, 24, 25, 29.97, 30, 47.95, 48, 50, 59.94, 60
- Video Formats
- (UltraHD2) 7680 x 4320p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
- Video Formats
- (4K) 4096 x 2160p 23.98, 24, 25, 29.97, 30, 47.95, 48, 50, 59.94, 60
- Video Formats
- (UltraHD) 3840 x 2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
- Video Formats
- (2K) 2048 x 1080p 23.98, 24, 25, 29.97, 30, 47.95, 48, 50, 59.94, 60
- Video Formats
- (2K) 2048 x 1080PsF 23.98, 24, 25
- Video Formats
- (HD) 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
- Video Formats
- (HD) 1080PsF 23.98, 24, 25, 29.97, 30
- Video Formats
- (HD) 1080i 50, 59.94, 60
- Video Formats
- (HD) 720p 50, 59.94, 60
- Video Formats
- (SD) 625i 50
- Video Formats
- (SD) 525i 59.94
- Note
- High Frame Rate and 8K/UltraHD2 capabilities are dependent on host system attributes. Not all systems and configurations will support all frame rates and raster sizes.
- Video Inputs Digital
- 12G-SDI, SMPTE-2082, 12-bit*, 10-bit
- Video Inputs Digital
- 6G-SDI, SMPTE-2081, 10-bit
- RGB 4
- 4:4 12-bit*, YCbCr 4:2:2 10-bit
- Single Link HD-SDI YCbCr 4
- 2:2 10-bit
- Dual Link RGB 4
- 4:4 12-bit*, Dual link YCbCr 4:2:2 10-bit
- YCbCr 4
- 2:2 10-bit, 8-bit
- Video Inputs Digital
- *Bit depth support is application dependent. Check with your software manufacturer for compatibility.
- Note
- Corvid 44 12G SDI connectors are HD BNC
- Video Outputs Digital
- 12G-SDI*, SMPTE-2082, 12-bit*, 10-bit
- Video Outputs Digital
- 6G-SDI*, SMPTE-2081, 10-bit
- Video Outputs Digital
- *Bit depth support is application dependent. Check with your software manufacturer for compatibility.
- SDI I/O
- 2K/HD, capture and monitoring is simultaneous
- SDI I/O
- 4K/UltraHD with 12G-SDI, capture and monitoring is simultaneous.
- SDI I/O
- 4K/UltraHD with 3G-SDI, all four connections must be used for either Input or Output.
- SDI I/O
- 8K/UltraHD2 with 12G-SDI, connections must be used for either Input or Output.
- Note
- When connections are configured for 12G-SDI or 6G-SDI, only UltraHD/4K/UltraHD2/8K formats are supported.
- Audio Inputs Digital
- 16-channel, 24 and 16-bit SDI embedded audio, 48 kHz sample rate, synchronous
- Audio Outputs Digital
- 16-channel, 24-bit SDI embedded audio, 48 kHz sample rate, synchronous
- Downstream Keyer
- Supports graphics with alpha channel over video, matte or framebuffer, or framebuffer content over incoming video or matte up to UltraHD/4K
- Reference
- Analog Color Black (1V) or Composite Sync (2 or 4V) or HD Tri-Level Sync (1V) via 1x HD-BNC on PCIe bracket
- Reference
- Reference input is terminated into 75 ohms when Genlock is set to Ref In
- Timecode
- LTC timecode input via 2-pin header on PCIe card [both short (low profile) and tall (full height) models]
- Timecode
- LTC timecode input via HD-BNC Ref In connector (switchable) on PCIe bracket [tall (full height) models only]
- Electrical Interface
- 8-lane PCIe 3.0
- Machine Controls
- RS-422, Sony 9-pin protocol via header on PCIe card [both short (low profile) and tall (full height) models]
- Machine Controls
- RS-422, Sony 9-pin protocol via port on PCIe bracket connected to header via DB9 cable [tall (full height) models only]
- Machine Controls
- 9-pin D-connector pinout is as follows:
- Machine Controls
- 1
- Machine Controls
- GND
- Machine Controls
- 2
- Machine Controls
- RX-
- Machine Controls
- 3
- Machine Controls
- TX+
- Machine Controls
- 4
- Machine Controls
- 5
- Machine Controls
- No Connection
- Machine Controls
- 6
- Machine Controls
- 7
- Machine Controls
- RX+
- Machine Controls
- 8
- Machine Controls
- TX-
- Machine Controls
- 9
- Machine Controls
- Shell
- Noise
- <50dBA (A-weighted at 1m in free air) [models with active cooling (fan)]
- Noise
- Ultra quiet (virtually silent) [models with passive* cooling (no fan)]
- Noise
- Passive cooling requires in-host/chassis air-flow minimum of 150 LFM (linear feet per minute) at 30 C
- Size (w x d x h)
- 0.75" x 7.0" x 3.15" (19 x 178 x 80 mm) [short (low profile) models]
- Size (w x d x h)
- 0.75" x 7.0" x 4.75" (19 x 178 x 121 mm) [tall (full height) models]
- PCIe Card
- 0.6 lbs (0.3 kg)
- Cables (all combined)
- 0.6 lbs (0.3 kg)
- Power
- 25W typical, 32W maximum
- Power
- PC Internal ATX Power Connector (Molex p/n 45559-0002)
- Note
- Unlike other Corvid cards, Corvid 44 12G can use either PCIe power from a 6 pin ATX connector, or via the PCIe slot.
- Safe Operating Temperature
- 0 to 40 C (32 to 104 F)
- Safe Storage Temperature (Power OFF)
- -40 to 60 C (-40 to 140 F)
- Operating Relative Humidity
- 10-90% noncondensing
- Operating Altitude
- <3,000 meters (<10,000 feet)
Documents
Documents are hosted by the manufacturer; these are links to their files.
