12G-AMA

The 12G-AMA is a 4-channel analog audio embedder/disembedder Mini-Converter with support for 12G-SDI input and output up to 4K/UltraHD. Fiber models offer single link fiber I/O including LC and ST options. Audio disembedding is always functional, providing four analog outputs. Audio embedding is user selectable, on a channel pair basis, to either pass 12G-SDI input audio or to embed input analog audio from the breakout cable. Analog audio levels are selectable. The 12G-AMA automatically detects and configures the input video standard.

Product code: 12G-AMA
Category: Video
Weight: 0.3 kg

Specifications

Video Formats: (4K) 4096x2160p 23.98, 24, 25, 29.97, 30, 47.95, 48, 50, 59.94, 60
Video Formats: (UltraHD) 3840x2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
Video Formats: (2K) 2048x1080p 23.98, 24, 25, 29.97, 30, 47.95, 48, 50, 59.94, 60
Video Formats: (HD) 1920x1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
Video Formats: (HD) 1920x1080i 50, 59.94, 60
Video Formats: (HD) 1280x720p 50, 59.94, 60
Video Formats: (SD) 625i 50
Video Formats: (SD) 525i 59.94
RGB and YCbCr, 4: 4:4/4:2:2, 10-bit
Note: Raster and frame rate dependent. Please see 12G-AMA Video Formats in Documents and Manual.
Video Input Digital: Single Link SD/HD/2K/UltraHD/4K
Video Input Digital: Single Link 3G-SDI Level A, B DL, or B DS, SMPTE 425
Wavelength: Rx 1260 nm (min), 1620 nm (max)
Optical Sensitivity: -10 dBm (min 12 Gbps), -14 dBm (min 3 Gbps)
Overload Power: -2 dBm (min)
Video Output Digital: Single Link SD/HD/2K/UltraHD/4K
Video Output Digital: Single Link 3G-SDI Level A, B DL, or B DS, SMPTE 425
Nominal Wavelength: Tx 1260 nm (min), 1310 nm (typ), 1360 nm (max)
Optical Power: -5 dBm (min), 0.5 dBm (max)
Extinction Ratio: 5.4 dB (min)
Optical Power: -5 dBm (min), 2 dBm (max)
Extinction Ratio: 3.4 dB (min)
Cable Equalization: (Belden 1694A coax)
Cable Equalization: 12 Gbps, 65m
Cable Equalization: 6 Gbps, 125m
Cable Equalization: 3 Gbps, 190m
Cable Equalization: 1.5 Gbps, 200m
Cable Equalization: 270 Mbps, 405m
Video Path Delay: Video Out is a delayed, reclocked version of Video In, at the same frame rate, etc. Video Out is undefined when no input.
Video Path Delay: 12G = 3.2 µsec
Video Path Delay: 6G = 3.2 µsec
Video Path Delay: 3G level B (Dual Stream HD mode) = 6.3 µsec
Video Path Delay: 3G level A = 3.2 µsec
Video Path Delay: HD (1.5 Gb) = 6.3 µsec
Video Path Delay: SD (270 Mb) = 17.2 µsec
Audio Inputs and Outputs: Balanced Analog Audio, 1x 25 pin D female connector on the converter, 4-channels in, 4-channels out
Audio Inputs and Outputs: 4x XLR female input breakout connectors
Audio Inputs and Outputs: 4x XLR male output breakout connectors
Digital Audio Converters: 24-bit
SMPTE 272M (SD): 20-bit, 48 kHz synchronous
SMPTE 299M (12G/6G/3G/1.5G): 24-bit, 48 kHz synchronous
Embedded Audio: Incoming embedded audio can be passed, removed, or overridden
Embedded Audio: Up to 16-channels supported
Note: 2048x1080p/PsF 29.97 and 30 formats support a maximum of 8-channels embedded audio.
Path Audio Latency: Embed Path 1100 µsec
Path Audio Latency: Disembed Path 1200 µsec
Analog Audio Levels: Configured via Mini-Config software:
Pro 1: 0 dBfs = +24 dBu
Pro 2: 0 dBfs = +18 dBu
Pro 3: 0 dBfs = +15 dBu
Consumer 1: 0 dBfs = +12 dBu
User Interface: External DIP switch
User Interface: USB port used with Mini-Config software application to configure the device via PC/Mac
Size (w x d x h): 5.8" x 3.1" x 1.0" (147.32 x 78.74 x 25.4 mm)
Weight: 0.6 lb (0.3 kg)
Power: +5-16VDC, 10 watts. power supply required, included with purchase
Safe Operating Temperature: 0 to 40 C (32 to 104 F)
Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
Operating Relative Humidity: 10-90% noncondensing
Operating Altitude: <3,000 meters (<10,000 feet)

Specification from AJA

12G-AMA

Specifications

Documents